PRODUCT FORMS

Titanium Bar Size Guide

Key dimensions and specification details to include when sourcing titanium bar from EST Metal.

Make the RFQ Easy to Quote.

For titanium bar, specify grade, diameter or section, length, applicable standard, surface condition, quantity and any inspection or certification requirements.

EST Metal current reference

Grades listed: Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 12, Grade 23
Diameter reference: 3–350 mm
Length reference: 100–6000 mm
Standards listed: ASTM B348, ASTM F136, ASTM F67 and AMS 4928

These are current website reference values; confirm availability, tolerance, heat treatment and certification for the specific order before purchase.

NEXT STEP

Have a specification to review?

REQUEST A QUOTE ↗

SIZE & TOLERANCE GUIDANCE

Titanium Bar Diameter, Size & Tolerance

Titanium bar dimensions and tolerances should be selected according to the applicable material specification, bar diameter, manufacturing route and end-use requirements. EST Metal supplies titanium bar and rod for industrial, machining and engineering applications, with dimensional requirements reviewed against the customer's specification or drawing.

Titanium Bar Diameter

The current EST Metal website reference range for titanium bar is 3–350 mm diameter, with lengths from 100 to 6000 mm. Availability depends on titanium grade, diameter, quantity, surface condition and required processing.

Diameter Tolerance

Diameter tolerance is not one universal value for every titanium bar. The applicable tolerance depends on the ordered diameter, specification, production condition and customer requirement. Where a drawing or project specification defines a tighter dimensional requirement, it should be stated clearly in the RFQ for technical review.

Straightness and Length Tolerance

Straightness and length requirements can be important for machining, long bars and precision components. These requirements should be confirmed according to the applicable standard and purchase order rather than assumed from a general stock size.

Surface Condition and Machining Allowance

Titanium bar may be supplied in different surface conditions depending on the product and order requirements. Surface condition can affect the usable finished diameter and machining allowance, so peeled, ground, polished or other requested conditions should be identified when requesting a quotation.

ASTM B348 and Customer Specifications

ASTM B348 is a commonly referenced specification for titanium and titanium alloy bar and billet. Final dimensional requirements, tolerances, grade, heat treatment, testing and certification should be confirmed against the applicable specification and purchase order.

What to Include in a Titanium Bar RFQ

For accurate technical review, include the titanium grade, diameter, length, quantity, applicable standard, surface condition, required tolerance and any drawing or inspection requirements.

Titanium Bar & Rod → ASTM B348 vs ASTM B265 → Titanium Grade Selection → Request a Quote →